Safety criterion

Welcome to use remote transmission unit manufactured by us. Each remote terminal uint has already experienced the complete assembly, test and inspection, also the careful check and adjustment before delivery, which has been in good condition when transport. When received, the repeater station shall be carefully checked for damage during transport, and in case of any problem, the carrier shall be reported immediately in written.

Working principle

Remote terminal uint is to receive the circuit fault information and circuit load operation information from overhead indicator installed in the circuit via wireless for analysis and compiling and then sends the information to main distribution network station via GPRS/GSM communications, to realize the online monitoring, fault detection and positioning functions of distribution network.

Main features

1.GSM or GPRS forwarding

GSM (short messages) and GPRS (data) are mutually the standby mode, which are used to send the substation condition, circuit load current, indicator status and fault information to main distribution network station, to ensure the reliable transmitting of distribution network fault information.

2 Remote upgrade

The equipment program can be upgraded conveniently through master remote maintenance station.

3 Work mode setting

The terminal can be in the two-remote or one-remote working mode by setting the intrinsic parameters of remote terminal uint.

Two-remote working mode: the terminal is online in real time, and the circuit load current and circuit status can be uploaded.

One-remote working mode: the terminal is online regularly; when the circuit breaks down, the terminal opens GPRS module power supply and sends the fault information to main distribution network station.

installation

a) By fitting the bracket installed in the hot sticks, screw detaching sheet nut to let the sheet fully retracted into the interior of the column (ie: try to tighten the sides, leaving enough space so as not to block the indicator when installing).

b)put the indicator into the bracket , and make the spring device to hook with the indicator spring, and rotate the spring device down firmly until after the indicator spring pulled position retractor can hook, then hook the spring with retractor and pull t he spring device out. And use the same method to the other side of the same end of the indicator spring to hook retractors.

c) Aligning the overhead lines pushed up and under the pressure of the overhead lines the indicator springs are divorced from the retractor spring and stucked overhead lines firmly.

Beijing TIANYIHONGDA Science & Technology Development Co., LTD is located in Lize Business Circle area, a prosperous business area in the center of Beijing City, China. is a high and advanced technology enterprise which is professionally engaged in research, production, sales and service of advanced smart monitoring technology products. We have great professional research team and techniques service team with rich working experience in the field of smart monitoring technology, cooperating with many famous Universities and Science Research Institutions on Smart Grid Automation, Smart Sensors and Wireless Communication and developing widespread market.

Our company has a great achievement in the development of Smart Grid, we by ourselves researched out the whole set of power distribution automation products such as DTU, FTU, RTU and so on. The central products and technology obtain national patents and certificate issued by relevant authoritative institution. The Fault Passage Indicators and Fault Location DTU systems has been stably running nearly 820,000 sets in the big city and middle city in domestic and overseas Market. accumulation of rich techniques and practical running experience on sites, these devices not only applied in the areas of national state grid, railway, petroleum, chemistry, coal, but also widespread used in the overseas countries such as India, Vietnam, Sri Lanka, Indonesian, Iran, Brazil, South Korea, South American and so on.

Meanwhile, the company is also successfully developing products to new monitoring fields, researched out Meteorological Monitoring Equipment, Environmental Monitoring Equipment and Video Monitoring Equipment and so on. All the products got the authoritative type test report and fully carry out and implement ISO9001 Quality Management System, these equipments have been successfully sold to domestic and overseas markets and approved by our clients.

Solar Power system with remote monitoring function is also successfully entering into market and get approval by the users. we have succefully finished many projects including commercial,residential applications for on-grid and off-grid applications such as 40KW substation, 60KW substation, residential ,countryside etc.

“ Sincerity is fundamental, clients is the first” & “strict quality control, earnest service supply” are our company’s management ideal, we sincerely invite all the cooperation partners working together to supply good qualities of products and service to domestic and overseas clients, devote ourselves to electrical smart grid development and monitoring technology development.